diff --git a/Toothbrush holder.scad b/Toothbrush holder.scad
new file mode 100644
index 0000000..2b2b0cf
--- /dev/null
+++ b/Toothbrush holder.scad
@@ -0,0 +1,108 @@
+$fn=100;
+dis=35;
+hei=20;
+scr1=0;
+scr2=0;
+
+module base_holder() {
+    union() {
+        difference() {
+            union(){
+                hull() {
+                    translate([-4,-4,-0])cube([1,8,5]);
+                    translate([12.5-13-19.8,-7.5,-0])cube([0.0001,15,5]);
+                }
+                translate([0,0,0])scale([3.3,2.75,0.5])cylinder(d=12,h=10);
+            }
+            translate([7,-18,-1])cube([15,36,10]);
+            translate([0,0,-1])scale([3.3,2.75,0.5])cylinder(d=10,h=14);
+        }
+        translate([7,13.93,0])cylinder(h=5,d=2.95);
+        translate([7,-13.93,0])cylinder(h=5,d=2.95);
+    }
+}
+
+union() {
+    for (i=[0:3]) {
+        translate([0,dis*i,0]) base_holder();
+    };
+    translate([-.5,0,0]) difference() {
+        translate([-23,-7.5,0])cube([3.5,dis*3+15,5]) ;
+        translate([-23.5,dis*0.5,2.5])rotate([0,90,0])cylinder(h=10,d=scr1);
+        translate([-20.4,dis*0.5,2.5])rotate([0,90,0])cylinder(h=1,d1=4,d2=scr2);
+        translate([-23.5,dis*2.5,2.5])rotate([0,90,0])cylinder(h=4,d=scr1);
+        translate([-20.4,dis*2.5,2.5])rotate([0,90,0])cylinder(h=1,d1=4,d2=scr2);
+    }
+};
+//p2
+union() {
+translate([-0.5,0,hei]) union() {
+    translate([0,0,0]) difference() {
+    union(){
+        hull() {
+            translate([-4,-4,-0])cube([1,8,5]);
+            translate([12.5-13-19.8,-7.5,-0])cube([0.0001,15,5]);
+        }
+        translate([0,0,0])cylinder(h=5,d=10);
+    }
+    
+    hull() {
+        translate([0,0,-1])cylinder(h=7,d=8);
+        translate([1,0,-1])cylinder(h=7,d=7.5);
+    }
+    translate([2,-18,-1])cube([15,36,10]);
+};
+        translate([0,dis,0]) difference() {
+    union(){
+        hull() {
+            translate([-4,-4,-0])cube([1,8,5]);
+            translate([12.5-13-19.8,-7.5,-0])cube([0.0001,15,5]);
+        }
+        translate([0,0,0])cylinder(h=5,d=10);
+    }
+    
+    hull() {
+        translate([0,0,-1])cylinder(h=7,d=8);
+        translate([1,0,-1])cylinder(h=7,d=7.5);
+    }
+    translate([2,-18,-1])cube([15,36,10]);
+};
+            translate([0,dis*2,0]) difference() {
+    union(){
+        hull() {
+            translate([-4,-4,-0])cube([1,8,5]);
+            translate([12.5-13-19.8,-7.5,-0])cube([0.0001,15,5]);
+        }
+        translate([0,0,0])cylinder(h=5,d=10);
+    }
+    
+    hull() {
+        translate([0,0,-1])cylinder(h=7,d=8);
+        translate([1,0,-1])cylinder(h=7,d=7.5);
+    }
+    translate([2,-18,-1])cube([15,36,10]);
+};
+                translate([0,dis*3,0]) difference() {
+    union(){
+        hull() {
+            translate([-4,-4,-0])cube([1,8,5]);
+            translate([12.5-13-19.8,-7.5,-0])cube([0.0001,15,5]);
+        }
+        translate([0,0,0])cylinder(h=5,d=10);
+    }
+    
+    hull() {
+        translate([0,0,-1])cylinder(h=7,d=8);
+        translate([1,0,-1])cylinder(h=7,d=7.5);
+    }
+    translate([2,-18,-1])cube([15,36,10]);
+};
+                    difference() {
+    translate([-23,-7.5,0])cube([3,dis*3+15,5]) ;
+    translate([-23.5,dis*0.5,2.5])rotate([0,90,0])cylinder(h=10,d=scr1);
+        translate([-20.9,dis*0.5,2.5])rotate([0,90,0])cylinder(h=1,d1=4,d2=scr2);
+    translate([-23.5,dis*2.5,2.5])rotate([0,90,0])cylinder(h=4,d=scr1);
+    translate([-20.9,dis*2.5,2.5])rotate([0,90,0])cylinder(h=1,d1=scr1,d2=scr2);
+};
+    };
+};
\ No newline at end of file