# OpenThings.py 27/09/2015 D.J.Whale
#
# Implement OpenThings message encoding and decoding
from lifecycle import *
import time
try:
import crypto # python 2
except ImportError:
from . import crypto # python 3
def warning(msg):
print("warning:" + str(msg))
def trace(msg):
print("OpenThings:%s" % str(msg))
class OpenThingsException(Exception):
def __init__(self, value):
self.value = value
def __str__(self):
return repr(self.value)
#----- CRYPT PROCESSING -------------------------------------------------------
crypt_pid = None
def init(pid):
global crypt_pid
crypt_pid = pid
#----- PARAMETERS -------------------------------------------------------------
# report has bit 7 clear
# command has bit 7 set
PARAM_ALARM = 0x21
PARAM_DEBUG_OUTPUT = 0x2D
PARAM_IDENTIFY = 0x3F
PARAM_SOURCE_SELECTOR = 0x40 # command only
PARAM_WATER_DETECTOR = 0x41
PARAM_GLASS_BREAKAGE = 0x42
PARAM_CLOSURES = 0x43
PARAM_DOOR_BELL = 0x44
PARAM_ENERGY = 0x45
PARAM_FALL_SENSOR = 0x46
PARAM_GAS_VOLUME = 0x47
PARAM_AIR_PRESSURE = 0x48
PARAM_ILLUMINANCE = 0x49
PARAM_LEVEL = 0x4C
PARAM_RAINFALL = 0x4D
PARAM_APPARENT_POWER = 0x50
PARAM_POWER_FACTOR = 0x51
PARAM_REPORT_PERIOD = 0x52
PARAM_SMOKE_DETECTOR = 0x53
PARAM_TIME_AND_DATE = 0x54
PARAM_VIBRATION = 0x56
PARAM_WATER_VOLUME = 0x57
PARAM_WIND_SPEED = 0x58
PARAM_GAS_PRESSURE = 0x61
PARAM_BATTERY_LEVEL = 0x62
PARAM_CO_DETECTOR = 0x63
PARAM_DOOR_SENSOR = 0x64
PARAM_EMERGENCY = 0x65
PARAM_FREQUENCY = 0x66
PARAM_GAS_FLOW_RATE = 0x67
PARAM_RELATIVE_HUMIDITY=0x68
PARAM_CURRENT = 0x69
PARAM_JOIN = 0x6A
PARAM_LIGHT_LEVEL = 0x6C
PARAM_MOTION_DETECTOR = 0x6D
PARAM_OCCUPANCY = 0x6F
PARAM_REAL_POWER = 0x70
PARAM_REACTIVE_POWER = 0x71
PARAM_ROTATION_SPEED = 0x72
PARAM_SWITCH_STATE = 0x73
PARAM_TEMPERATURE = 0x74
PARAM_VOLTAGE = 0x76
PARAM_WATER_FLOW_RATE = 0x77
PARAM_WATER_PRESSURE = 0x78
PARAM_TEST = 0xAA
param_info = {
PARAM_ALARM : {"n":"ALARM", "u":""},
PARAM_DEBUG_OUTPUT : {"n":"DEBUG_OUTPUT", "u":""},
PARAM_IDENTIFY : {"n":"IDENTIFY", "u":""},
PARAM_SOURCE_SELECTOR : {"n":"SOURCE_SELECTOR", "u":""},
PARAM_WATER_DETECTOR : {"n":"WATER_DETECTOR", "u":""},
PARAM_GLASS_BREAKAGE : {"n":"GLASS_BREAKAGE", "u":""},
PARAM_CLOSURES : {"n":"CLOSURES", "u":""},
PARAM_DOOR_BELL : {"n":"DOOR_BELL", "u":""},
PARAM_ENERGY : {"n":"ENERGY", "u":"kWh"},
PARAM_FALL_SENSOR : {"n":"FALL_SENSOR", "u":""},
PARAM_GAS_VOLUME : {"n":"GAS_VOLUME", "u":"m3"},
PARAM_AIR_PRESSURE : {"n":"AIR_PRESSURE", "u":"mbar"},
PARAM_ILLUMINANCE : {"n":"ILLUMINANCE", "u":"Lux"},
PARAM_LEVEL : {"n":"LEVEL", "u":""},
PARAM_RAINFALL : {"n":"RAINFALL", "u":"mm"},
PARAM_APPARENT_POWER : {"n":"APPARENT_POWER", "u":"VA"},
PARAM_POWER_FACTOR : {"n":"POWER_FACTOR", "u":""},
PARAM_REPORT_PERIOD : {"n":"REPORT_PERIOD", "u":"s"},
PARAM_SMOKE_DETECTOR : {"n":"SMOKE_DETECTOR", "u":""},
PARAM_TIME_AND_DATE : {"n":"TIME_AND_DATE", "u":"s"},
PARAM_VIBRATION : {"n":"VIBRATION", "u":""},
PARAM_WATER_VOLUME : {"n":"WATER_VOLUME", "u":"l"},
PARAM_WIND_SPEED : {"n":"WIND_SPEED", "u":"m/s"},
PARAM_GAS_PRESSURE : {"n":"GAS_PRESSURE", "u":"Pa"},
PARAM_BATTERY_LEVEL : {"n":"BATTERY_LEVEL", "u":"V"},
PARAM_CO_DETECTOR : {"n":"CO_DETECTOR", "u":""},
PARAM_DOOR_SENSOR : {"n":"DOOR_SENSOR", "u":""},
PARAM_EMERGENCY : {"n":"EMERGENCY", "u":""},
PARAM_FREQUENCY : {"n":"FREQUENCY", "u":"Hz"},
PARAM_GAS_FLOW_RATE : {"n":"GAS_FLOW_RATE", "u":"m3/hr"},
PARAM_RELATIVE_HUMIDITY:{"n":"RELATIVE_HUMIDITY", "u":"%"},
PARAM_CURRENT : {"n":"CURRENT", "u":"A"},
PARAM_JOIN : {"n":"JOIN", "u":""},
PARAM_LIGHT_LEVEL : {"n":"LIGHT_LEVEL", "u":""},
PARAM_MOTION_DETECTOR : {"n":"MOTION_DETECTOR", "u":""},
PARAM_OCCUPANCY : {"n":"OCCUPANCY", "u":""},
PARAM_REAL_POWER : {"n":"REAL_POWER", "u":"W"},
PARAM_REACTIVE_POWER : {"n":"REACTIVE_POWER", "u":"VAR"},
PARAM_ROTATION_SPEED : {"n":"ROTATION_SPEED", "u":"RPM"},
PARAM_SWITCH_STATE : {"n":"SWITCH_STATE", "u":""},
PARAM_TEMPERATURE : {"n":"TEMPERATURE", "u":"C"},
PARAM_VOLTAGE : {"n":"VOLTAGE", "u":"V"},
PARAM_WATER_FLOW_RATE : {"n":"WATER_FLOW_RATE", "u":"l/hr"},
PARAM_WATER_PRESSURE : {"n":"WATER_PRESSURE", "u":"Pa"},
}
def paramname_to_paramid(paramname):
"""Turn a parameter name to a parameter id number"""
for paramid in param_info:
name = param_info[paramid]['n'] # name
if name == paramname:
return paramid
raise ValueError("Unknown param name %s" % paramname)
def paramid_to_paramname(paramid):
"""Turn a parameter id number into a parameter name"""
try:
return param_info[paramid]['n']
except KeyError:
return "UNKNOWN_%s" % str(hex(paramid))
#----- MESSAGE DECODER --------------------------------------------------------
#TODO if silly lengths or silly types seen in decode, this might imply
#we're trying to process an encrypted packet without decrypting it.
#the code should be more robust to this (by checking the CRC)
def decode(payload, decrypt=True, receive_timestamp=None):
"""Decode a raw buffer into an OpenThings pydict"""
#Note, decrypt must already have run on this for it to work
length = payload[0]
# CHECK LENGTH
if length+1 != len(payload) or length < 10:
raise OpenThingsException("bad payload length")
#return {
# "type": "BADLEN",
# "len_actual": len(payload),
# "len_expected": length,
# "payload": payload[1:]
#}
# DECODE HEADER
mfrId = payload[1]
productId = payload[2]
encryptPIP = (payload[3]<<8) + payload[4]
header = {
"mfrid" : mfrId,
"productid" : productId,
"encryptPIP": encryptPIP
}
if decrypt:
# DECRYPT PAYLOAD
# [0]len,mfrid,productid,pipH,pipL,[5]
crypto.init(crypt_pid, encryptPIP)
crypto.cryptPayload(payload, 5, len(payload)-5) # including CRC
#printhex(payload)
# sensorId is in encrypted region
sensorId = (payload[5]<<16) + (payload[6]<<8) + payload[7]
header["sensorid"] = sensorId
# CHECK CRC
crc_actual = (payload[-2]<<8) + payload[-1]
crc_expected = calcCRC(payload, 5, len(payload)-(5+2))
#trace("crc actual:%s, expected:%s" %(hex(crc_actual), hex(crc_expected)))
if crc_actual != crc_expected:
raise OpenThingsException("bad CRC")
#return {
# "type": "BADCRC",
# "crc_actual": crc_actual,
# "crc_expected": crc_expected,
# "payload": payload[1:],
#}
# DECODE RECORDS
i = 8
recs = []
while i < length and payload[i] != 0:
# PARAM
param = payload[i]
wr = ((param & 0x80) == 0x80)
paramid = param & 0x7F
if paramid in param_info:
paramname = (param_info[paramid])["n"] # name
paramunit = (param_info[paramid])["u"] # unit
else:
paramname = "UNKNOWN_" + hex(paramid)
paramunit = "UNKNOWN_UNIT"
i += 1
# TYPE/LEN
typeid = payload[i] & 0xF0
plen = payload[i] & 0x0F
i += 1
rec = {
"wr": wr,
"paramid": paramid,
"paramname": paramname,
"paramunit": paramunit,
"typeid": typeid,
"length": plen
}
if plen != 0:
# VALUE
valuebytes = []
for x in range(plen):
valuebytes.append(payload[i])
i += 1
value = Value.decode(valuebytes, typeid, plen)
rec["valuebytes"] = valuebytes
rec["value"] = value
# store rec
recs.append(rec)
m = {
"type": "OK",
"header": header,
"recs": recs
}
if receive_timestamp != None:
m["rxtimestamp"] = receive_timestamp
return Message(m)
#----- MESSAGE ENCODER --------------------------------------------------------
#
# Encodes a message using the OpenThings message payload structure
# R1 message product id 0x02 monitor and control (in switching program?)
# C1 message product id 0x01 monitor only (in listening program)
def encode(spec, encrypt=True):
"""Encode a pydict specification into a OpenThings binary payload"""
# The message is not encrypted, but the CRC is generated here.
payload = []
# HEADER
payload.append(0) # length, fixup later when known
header = spec["header"]
payload.append(header["mfrid"])
payload.append(header["productid"])
if not ("encryptPIP" in header):
if encrypt:
warning("no encryptPIP in header, assuming 0x0100")
encryptPIP = 0x0100
else:
encryptPIP = header["encryptPIP"]
payload.append((encryptPIP&0xFF00)>>8) # MSB
payload.append((encryptPIP&0xFF)) # LSB
sensorId = header["sensorid"]
payload.append((sensorId>>16) & 0xFF) # HIGH
payload.append((sensorId>>8) & 0xFF) # MID
payload.append((sensorId) & 0XFF) # LOW
# RECORDS
for rec in spec["recs"]:
wr = rec["wr"]
paramid = rec["paramid"]
typeid = rec["typeid"]
if "length" in rec:
length = rec["length"]
else:
length = None # auto detect
# PARAMID
if wr:
payload.append(0x80 + paramid) # WRITE
else:
payload.append(paramid) # READ
# TYPE/LENGTH
payload.append((typeid)) # need to back patch length for auto detect
lenpos = len(payload)-1 # for backpatch
# VALUE
valueenc = [] # in case of no value
if "value" in rec:
value = rec["value"]
valueenc = Value.encode(value, typeid, length)
if len(valueenc) > 15:
raise ValueError("value longer than 15 bytes")
for b in valueenc:
payload.append(b)
payload[lenpos] = (typeid) | len(valueenc)
# FOOTER
payload.append(0) # NUL
crc = calcCRC(payload, 5, len(payload)-5)
payload.append((crc>>8) & 0xFF) # MSB
payload.append(crc&0xFF) # LSB
# back-patch the length byte so it is correct
payload[0] = len(payload)-1
if encrypt:
# ENCRYPT
# [0]len,mfrid,productid,pipH,pipL,[5]
crypto.init(crypt_pid, encryptPIP)
crypto.cryptPayload(payload, 5, len(payload)-5) # including CRC
return payload
#---- VALUE CODEC -------------------------------------------------------------
class Value():
UINT = 0x00
UINT_BP4 = 0x10
UINT_BP8 = 0x20
UINT_BP12 = 0x30
UINT_BP16 = 0x40
UINT_BP20 = 0x50
UINT_BP24 = 0x60
CHAR = 0x70
SINT = 0x80
SINT_BP8 = 0x90
SINT_BP16 = 0xA0
SINT_BP24 = 0xB0
# C0,D0,E0 RESERVED
FLOAT = 0xF0
@staticmethod
def typebits(typeid):
"""work out number of bits to represent this type"""
if typeid == Value.UINT_BP4: return 4
if typeid == Value.UINT_BP8: return 8
if typeid == Value.UINT_BP12: return 12
if typeid == Value.UINT_BP16: return 16
if typeid == Value.UINT_BP20: return 20
if typeid == Value.UINT_BP24: return 24
if typeid == Value.SINT_BP8: return 8
if typeid == Value.SINT_BP16: return 16
if typeid == Value.SINT_BP24: return 24
raise ValueError("Can't calculate number of bits for type:" + str(typeid))
@staticmethod
def highestClearBit(value, maxbits=15*8):
"""Find the highest clear bit scanning MSB to LSB"""
mask = 1<<(maxbits-1)
bitno = maxbits-1
while mask != 0:
#trace("compare %s with %s" %(hex(value), hex(mask)))
if (value & mask) == 0:
#trace("zero at bit %d" % bitno)
return bitno
mask >>= 1
bitno-=1
#trace("not found")
return None # NOT FOUND
@staticmethod
def valuebits(value):
"""Work out number of bits required to represent this value"""
if value >= 0 or type(value) != int:
raise RuntimeError("valuebits only on -ve int at moment")
if value == -1: # always 0xFF, so always needs exactly 2 bits to represent (sign and value)
return 2 # bits required
#trace("valuebits of:%d" % value)
# Turn into a 2's complement representation
MAXBYTES=15
MAXBITS = 1<<(MAXBYTES*8)
#TODO check for truncation?
value = value & MAXBITS-1
#trace("hex:%s" % hex(value))
highz = Value.highestClearBit(value, MAXBYTES*8)
#trace("highz at bit:%d" % highz)
# allow for a sign bit, and bit numbering from zero
neededbits = highz+2
#trace("needed bits:%d" % neededbits)
return neededbits
@staticmethod
def encode(value, typeid, length=None):
#trace("encoding:" + str(value))
if typeid == Value.CHAR:
if type(value) != str:
value = str(value)
if length != None and len(str) > length:
raise ValueError("String too long")
result = []
for ch in value:
result.append(ord(ch))
if len != None and len(result) < length:
for a in range(length-len(result)):
result.append(0) # zero pad
return result
if typeid == Value.FLOAT:
raise ValueError("IEEE-FLOAT not yet supported")
if typeid <= Value.UINT_BP24:
# unsigned integer
if value < 0:
raise ValueError("Cannot encode negative number as an unsigned int")
if typeid != Value.UINT:
# pre-adjust for BP
if type(value) == float:
value *= (2**Value.typebits(typeid)) # shifts float into int range using BP
value = round(value, 0) # take off any unstorable bits
value = int(value) # It must be an integer for the next part of encoding
# code it in the minimum length bytes required
# Note that this codes zero in 0 bytes (might not be correct?)
v = value
result = []
while v != 0:
result.insert(0, v&0xFF) # MSB first, so reverse bytes as inserting
v >>= 8
# check length mismatch and zero left pad if required
if length != None:
if len(result) < length:
result = [0 for x in range(length-len(result))] + result
elif len(result) > length:
raise ValueError("Field width overflow, not enough bits")
return result
if typeid >= Value.SINT and typeid <= Value.SINT_BP24:
# signed int
if typeid != Value.SINT:
# pre-adjust for BP
if type(value) == float:
value *= (2**Value.typebits(typeid)) # shifts float into int range using BP
value = round(value, 0) # take off any unstorable bits
value = int(value) # It must be an integer for the next part of encoding
#If negative, take complement by masking with the length mask
# This turns -1 (8bit) into 0xFF, which is correct
# -1 (16bit) into 0xFFFF, which is correct
# -128(8bit) into 0x80, which is correct
#i.e. top bit will always be set as will all following bits up to number
if value < 0: # -ve
if typeid == Value.SINT:
bits = Value.valuebits(value)
else:
bits = Value.typebits(typeid)
#trace("need bits:" + str(bits))
# NORMALISE BITS TO BYTES
#round up to nearest number of 8 bits
# if already 8, leave 1,2,3,4,5,6,7,8 = 8 0,1,2,3,4,5,6,7 (((b-1)/8)+1)*8
# 9,10,11,12,13,14,15,16=16
bits = (((bits-1)/8)+1)*8 # snap to nearest byte boundary
#trace("snap bits to 8:" + str(bits))
value &= ((2**bits)-1)
neg = True
else:
neg = False
#encode in minimum bytes possible
v = value
result = []
while v != 0:
result.insert(0, v&0xFF) # MSB first, so reverse when inserting
v >>= 8
# if desired length mismatch, zero pad or sign extend to fit
if length != None: # fixed size
if len(result) < length: # pad
if not neg:
result = [0 for x in range(length-len(result))] + result
else: # negative
result = [0xFF for x in range(length-len(result))] + result
elif len(result) >length: # overflow
raise ValueError("Field width overflow, not enough bits")
return result
raise ValueError("Unknown typeid:%d" % typeid)
@staticmethod
def decode(valuebytes, typeid, length):
if typeid <= Value.UINT_BP24:
result = 0
# decode unsigned integer first
for i in range(length):
result <<= 8
result += valuebytes[i]
# process any fixed binary points
if typeid == Value.UINT:
return result # no BP adjustment
return (float(result)) / (2**Value.typebits(typeid))
elif typeid == Value.CHAR:
result = ""
for b in range(length):
result += chr(b)
return result
elif typeid >= Value.SINT and typeid <= Value.SINT_BP24:
# decode unsigned int first
result = 0
for i in range(length):
result <<= 8
result += valuebytes[i]
# turn to signed int based on high bit of MSB
# 2's comp is 1's comp plus 1
neg = ((valuebytes[0] & 0x80) == 0x80)
if neg:
onescomp = (~result) & ((2**(length*8))-1)
result = -(onescomp + 1)
# adjust for binary point
if typeid == Value.SINT:
return result # no BP, return as int
else:
# There is a BP, return as float
return (float(result))/(2**Value.typebits(typeid))
elif typeid == Value.FLOAT:
return "TODO_FLOAT_IEEE_754-2008" #TODO: IEEE 754-2008
raise ValueError("Unsupported typeid:%" + hex(typeid))
#----- CRC CALCULATION --------------------------------------------------------
#int16_t crc(uint8_t const mes[], unsigned char siz)
#{
# uint16_t rem = 0;
# unsigned char byte, bit;
#
# for (byte = 0; byte < siz; ++byte)
# {
# rem ^= (mes[byte] << 8);
# for (bit = 8; bit > 0; --bit)
# {
# rem = ((rem & (1 << 15)) ? ((rem << 1) ^ 0x1021) : (rem << 1));
# }
# }
# return rem;
#}
def calcCRC(payload, start, length):
rem = 0
for b in payload[start:start+length]:
rem ^= (b<<8)
for bit in range(8):
if rem & (1<<15) != 0:
# bit is set
rem = ((rem<<1) ^ 0x1021) & 0xFFFF # always maintain U16
else:
# bit is clear
rem = (rem<<1) & 0xFFFF # always maintain U16
return rem
#----- MESSAGE UTILITIES ------------------------------------------------------
# SAMPLE MESSAGE
# SWITCH = {
# "header": {
# "mfrid": MFRID_ENERGENIE,
# "productid": PRODUCTID_MIHO005,
# "encryptPIP": CRYPT_PIP,
# "sensorid": 0 # FILL IN
# },
# "recs": [
# {
# "wr": True,
# "paramid": OpenThings.PARAM_SWITCH_STATE,
# "typeid": OpenThings.Value.UINT,
# "length": 1,
# "value": 0 # FILL IN
# }
# ]
# }
import copy
class Message():
BLANK = {
"header": {
"mfrid" : None,
"productid": None,
"sensorid": None
},
"recs":[]
}
def __init__(self, pydict=None, **kwargs):
if pydict == None:
pydict = copy.deepcopy(Message.BLANK)
self.pydict = pydict
self.set(**kwargs)
def __getitem__(self, key):
try:
# an integer key is used as a paramid in recs[]
key = int(key)
except:
# not an integer, so do a normal key lookup
# typically used for msg["header"] and msg["recs"]
# just returns a reference to that part of the inner pydict
return self.pydict[key]
# Is an integer, so index into recs[]
##print("looking up in recs")
for rec in self.pydict["recs"]:
if "paramid" in rec:
paramid = rec["paramid"]
if paramid == key:
return rec
raise KeyError("no paramid found for %s" % str(hex(key)))
def __setitem__(self, key, value):
"""set the header or the recs to the provided value"""
try:
key = int(key)
except:
# Not an parseable integer, so access by field name
##print("set by key")
self.pydict[key] = value
return
# Is an integer, so index into recs[]
##print("looking up in recs")
i = 0
for rec in self.pydict["recs"]:
if "paramid" in rec:
paramid = rec["paramid"]
if paramid == key:
##print("found at index %d %s" % (i, rec))
# add in the paramid
value["paramid"] = key
self.pydict["recs"][i] = value
return
i += 1
# Not found, so we should add it
print("no paramid for key %s, adding..." % str(hex(key)))
#TODO: add
# add in the paramid
value["paramid"] = key
self.pydict["recs"].append(value)
@untested
def copyof(self): # -> Message
"""Clone, to create a new message that is a completely independent copy"""
import copy
return Message(copy.deepcopy(self.pydict))
def set(self, **kwargs):
"""Set fields in the message from key value pairs"""
for key in kwargs:
value = kwargs[key]
# Is it a recs_PARAM_NAME_value format?
if key.startswith('recs_') and len(key)>6 and key[6].isupper():
self.set_PARAM_NAME(key[5:], value)
else:
# It's a full path
pathed_key = key.split('_')
m = self.pydict
# walk to the parent
for pkey in pathed_key[:-1]:
# If the key parseable as an integer, use as a list index instead
try:
pkey = int(pkey)
except:
pass
m = m[pkey]
# set the parent to have a key that points to the new value
pkey = pathed_key[-1]
# If the key parseable as an integer, use as a list index instead
try:
pkey = int(pkey)
except:
pass
# if index exists, change it, else create it
try:
m[pkey] = value
except IndexError:
# expand recs up to pkey
l = len(m) # length of list
gap = (l - pkey)+1
for i in range(gap):
m.append({})
m[pkey] = value
def set_PARAM_NAME(self, key, value):
"""Set a parameter given a PARAM_NAME key like recs_PARAM_NAME_field_nae"""
##print("set param name %s %s" % (key, value))
##key='recs_SWITCH_STATE'
#e.g. recs_SWITCH_STATE_value
#scan forward from char 5 until first lower case char, or end
pos = 0
last_uc=None
for c in key:
pos += 1
if c.isupper():
last_uc = pos
if c.islower(): break
name = key[:last_uc]
# turn PARAM_NAME into an integer id
param_id = paramname_to_paramid(name)
##print("paramid %d" % param_id)
# search for the id as a rec[]["paramid":v] value and get the rec
found = False
pos = 0
for rec in self.pydict["recs"]:
if "paramid" in rec:
if rec["paramid"] == param_id:
##print("found: %s" % rec)
found = True
break
pos += 1
if not found:
raise ValueError("No such paramid in message: %s" % name)
# is this rec_PARAM_NAME or rec_PARAM_NAME_field_name??
if len(key) == len(name):
##print("REC")
value["paramid"] = param_id
self.pydict["recs"][pos] = value
else:
##print("REC with field")
field_key = key[len(name)+1:]
self.pydict["recs"][pos][field_key] = value
def append_rec(self, *args, **kwargs):
"""Add a rec"""
if type(args[0]) == dict:
# This is ({})
self.pydict["recs"].append(args[0])
return len(self.pydict["recs"])-1 # index of rec just added
elif type(args[0]) == int:
if len(kwargs) == 0:
# This is (PARAM_x, pydict)
paramid = args[0]
pydict = args[1]
pydict["paramid"] = paramid
return self.append_rec(pydict)
else:
# This is (PARAM_x, key1=value1, key2=value2)
paramid = args[0]
# build a pydict
pydict = {"paramid":paramid}
for key in kwargs:
value = kwargs[key]
pydict[key] = value
self.append_rec(pydict)
else:
raise ValueError("Not sure how to parse arguments to append_rec")
def get(self, keypath):
"""READ(GET) from a single keypathed entry"""
path = keypath.split("_")
m = self.pydict
# walk to the final item
for pkey in path:
try:
pkey = int(pkey)
except:
pass
m = m[pkey]
return m
def __str__(self): # -> str
return str(self.pydict)
def dump(self):
msg = self.pydict
timestamp = None
# TIMESTAMP
if timestamp != None:
print("receive-time:%s" % time.strftime('%Y-%m-%d %H:%M:%S', time.localtime(timestamp)))
# HEADER
if "header" in msg:
header = msg["header"]
def gethex(key):
if key in header:
value = header[key]
if value != None: return str(hex(value))
return ""
mfrid = gethex("mfrid")
productid = gethex("productid")
sensorid = gethex("sensorid")
print("mfrid:%s prodid:%s sensorid:%s" % (mfrid, productid, sensorid))
# RECORDS
if "recs" in msg:
for rec in msg["recs"]:
wr = rec["wr"]
if wr == True:
write = "write"
else:
write = "read "
try:
paramname = rec["paramname"] #NOTE: This only comes out from decoded messages
except:
paramname = ""
try:
paramid = rec["paramid"] #NOTE: This is only present on a input message (e.g SWITCH)
paramname = paramid_to_paramname(paramid)
paramid = str(hex(paramid))
except:
paramid = ""
try:
paramunit = rec["paramunit"] #NOTE: This only comes out from decoded messages
except:
paramunit = ""
if "value" in rec:
value = rec["value"]
else:
value = None
print("%s %s %s %s = %s" % (write, paramid, paramname, paramunit, str(value)))
#TODO: Remove this when the new Message() integration is tested
#@deprecated
#def showMessage(msg, timestamp=None):
# """Show the message in a friendly format"""
#
# # HEADER
# header = msg["header"]
# mfrid = header["mfrid"]
# productid = header["productid"]
# sensorid = header["sensorid"]
# if timestamp != None:
# print("receive-time:%s" % time.strftime('%Y-%m-%d %H:%M:%S', time.localtime(timestamp)))
# print("mfrid:%s prodid:%s sensorid:%s" % (hex(mfrid), hex(productid), hex(sensorid)))
#
# # RECORDS
# for rec in msg["recs"]:
# wr = rec["wr"]
# if wr == True:
# write = "write"
# else:
# write = "read "
#
# try:
# paramname = rec["paramname"] # This only come out from decoded messages
# except:
# paramname = ""
##
# try:
# paramid = rec["paramid"] #This is only present on a input message (e.g SWITCH)
# paramname = paramid_to_paramname(paramid)
# paramid = str(hex(paramid))
## except:
# paramid = ""
#
# try:
# paramunit = rec["paramunit"] # This only come out from decoded messages
# except:
# paramunit = ""
#
# if "value" in rec:
# value = rec["value"]
# else:
# value = None
#
# print("%s %s %s %s = %s" % (write, paramid, paramname, paramunit, str(value)))
# Example paths into message
# header_sensorid msg["header"]["sensorid"]
# recs_0_value msg["recs"][0]["value"]
# recs_WATER_DETECTOR_value msg["recs"].find_param("WATER_DETECTOR")["value"]
#TODO: Remove this when the new Message() integration is tested
#@deprecated
#def alterMessage(message, **kwargs):
# """Change parameters in-place in a message template"""
#
# for arg in kwargs:
# path = arg.split("_")
# value = kwargs[arg]
# m = message
#
# for pkey in path[:-1]:
# try:
# # If it is convertable to an int, it's an array index
# pkey = int(pkey)
# except:
# # It must be a field name
# pass
# m = m[pkey]
# ##trace("old value:%s" % m[path[-1]])
# m[path[-1]] = value
#
# ##trace("modified:" + str(message))
#
# return message
#TODO: Remove this when the new Message() integration is tested
#@deprecated
#def getFromMessage(message, keypath):
# """Get a field from a message, given an underscored keypath to the item"""
# path = keypath.split("_")
#
# for pkey in path[:-1]:
# try:
# pkey = int(pkey)
# except:
# pass
# message = message[pkey]
# return message[path[-1]]
# END
David Whale