Tested MIHO014 relay on Raspberry pi - works fine

Tested with new devices on Raspberry Pi. All work OK

Added in support for other devices like control and monitor only

Added support for MIHO014 in line relay. ...

Tested in simulation

inner_times now correctly set on both interfaces. ...

Tested in simulation

Now passes and uses inner_times override to radio driver ...

MIHO008 white_light working in simulation
and the ENER002 still uses the older inner_times=8

radio_config now making it through to OnAir.TwoBitInterface.send()

Device.config is now Device.radio_config ...

This is to prevent confusion with get_config and get_radio_config

Tested MIHO032 PIR sensor, works fine

Added support for MIHO032 MotionSensor

Support for MIHO003 OpenSensor tested and working

Added MIHO033 OpenSensor to Devices.py

Removed sample programs and moved to issues in the issue log ...

These are not ready to be released yet and are at early ideas stage.

Tested and tweaked for Python 3 support

Tested demos on real hardware. Works fine. ...

Observation: handling of incoming messages does not check registry,
it only checks the router, so if you don't have a device object
bound to it, it will be seen as unknown. Needs fixing, but not a high
priority.

Tested setup_tool.py on real hardware - works OK ...

Some tweaks required but now works fine

All test cases now run fine. ...

There is no capture/compare at the moment, so verification is manual

All testers except Registry_test now running all tests

Rationalised all comment styles. ...

The double hash (##) is reserved for commented out lines of code.
The single hash (#) is reserved for normal comments.

Moved setup code from global scope of Registry to energenie.init() ...

This makes it possible to use the registry in test cases

auto variable create example added. ...

Tested in simulation, seems to work, but need to re-test on hardware

Energy monitor example written. ...

Not tested yet, as need to test with real devices

Standalone discovery example written. ...

Not able to test until real devices added

Improved registry listing by using iterator

Iterator added to registry

Clarified control_any_noreg.py by adding a MIHO005 example

Renamed a lot of the control_ demos, due to device agnostic behaviour

Removed control_both.py, as control_any.py will do any sockets now

control_mihome.py recoded to use remembered registry

control_legacy.py simplified, assuming learning done by setup_tool.py