Manual tests to perform on release:

0. prepare for testing

git clone https://github.com/whaleygeek/pyenergenie
cd pyenergenie


1. build radio driver on Raspberry Pi

cd energenie/drv
./build_rpi

(If you think the code has changed and want to refresh the cached binary)
git add radio_rpi.so


2. legacy.py runs on Raspberry Pi

cd src
sudo python legacy.py

("do you want to learn any switches?" Y)
("Learn switch 1?" Y)
("Press the LEARN button on any switch 1 for 5 secs until LED flashes")
("press ENTER when LED is flashing")
  (hold green button for 10 seconds for fast flash to clear pairing memory)
  (press ENTER)
("ON")
("Device should now be programmed")
("Testing....")
("OFF")
("ON")
("OFF")
("ON")
("OFF")
("ON")
  (say no to learn other switches)
("switch 0 ON")
  (turns on due to 'all switches on')
("switch 0 OFF")
  (turns off due to 'all switches off')
("switch 1 ON")
  (turns on)
("switch 1 OFF")
  (turns off)
("switch 2 ON")
("switch 2 OFF")
("switch 3 ON")
("switch 3 OFF")
("switch 4 ON")
("switch 4 OFF")


3. monitor.py

cd src
sudo python monitor.py

(plug in a MiHome adaptor plus)
(press button to force it to send a report)

("monitor:1463122760.36,4,2,1675,1111100,1,243,49.8984375,0,0,None,None")
("mfrid:0x4 prodid:0x2 sensorid:0x68b")
("read  REAL_POWER W = 0")
("read  REACTIVE_POWER VAR = 0")
("read  VOLTAGE V = 242")
("read  FREQUENCY Hz = 49.8984375")
("read  SWITCH_STATE  = 1")
("monitor:1463122770.34,4,2,1675,1111100,1,242,49.8984375,0,0,None,None")


(plug in a MiHome house monitor)
(wait a few seconds for a report to come back)

("read  APPARENT_POWER VA = 0")
("read  VOLTAGE V = 4.65625")
("read  CURRENT A = 0.0")
("ADD device:0x1b9 Manufacturer:Energenie Product:MIHO006 HOUSE MONITOR")
("monitor:1463122944.38,4,5,441,0100011,None,4.65625,None,None,None,0,0.0")


(put batteries in a MiHome eTRV)
(wait a few seconds for a join report to come back)

("mfrid:0x4 prodid:0x3 sensorid:0xc2a")
("read  VOLTAGE V = 3.05859375")
("ADD device:0xc2a Manufacturer:Energenie Product:MIHO013 ETRV")
("monitor:1463123313.37,4,3,3114,0100000,None,3.05859375,None,None,None,None,None")
("mfrid:0x4 prodid:0x3 sensorid:0xc2a")
("monitor:1463123315.15,4,3,3114,0000000,None,None,None,None,None,None,None")
("Empty record:{'header': {'sensorid': 3114, 'productid': 3, 'encryptPIP': 17443, 'mfrid': 4}, 'type': 'OK', 'recs': []}")
("mfrid:0x4 prodid:0x3 sensorid:0xc2a")
("read  TEMPERATURE C = 22.0")
("monitor:1463123323.41,4,3,3114,0000000,None,None,None,None,None,None,None")


4. switch.py

cd src
sudo python switch.py

(plug in a MiHome adaptor plus, should report)
(every 10 seconds it should toggle it's on/of state)

END