Weather station gateway for WH1080

@Alex Tucker Alex Tucker authored on 21 Nov 2016
LICENSE Initial commit 10 years ago
Makefile Working on Weather Underground support 10 years ago
README.md Update README.md 10 years ago
bcm2835.c Reads station ID and password from credentials file. Enabled BMP085 support on I2C-1 bus for rev 2 RPi boards. 10 years ago
bcm2835.h Reads station ID and password from credentials file. Enabled BMP085 support on I2C-1 bus for rev 2 RPi boards. 10 years ago
bmp085.c Reads station ID and password from credentials file. Enabled BMP085 support on I2C-1 bus for rev 2 RPi boards. 10 years ago
rfm01.h V0.3 by Kevin Sangeelee with changes for V2 of RPi board 10 years ago
wh1080_rf.c Revert back pin numbering for old Raspberry Pi. Don't use pressure sensor. 7 years ago
wh1080_rf.h Revert back pin numbering for old Raspberry Pi. Don't use pressure sensor. 7 years ago
wunderground.c Put credentials in /etc/wunderground/creds.txt. Update wget command. 7 years ago
wunderground.h Working on Weather Underground support 10 years ago
README.md

WH1080-Weather-Underground

Raspberry Pi bridge between a WH1080 weather station and the Weather Underground PWS network

95% based on Kevin Sangeelee's work at http://www.susa.net/wordpress/2012/08/raspberry-pi-reading-wh1081-weather-sensors-using-an-rfm01-and-rfm12b/

See also:

http://www.raspberrypi.org/forums/viewtopic.php?p=152023
and:

http://www.quasaruk.co.uk/acatalog/RFM01.pdf

Works on a Raspberry Pi V2 with an RFM01 module.

For more details see: http://www.britishideas.com/2014/06/07/wh1080-weather-station-and-weather-underground/