# OpenThings.py 27/09/2015 D.J.Whale
#
# Implement OpenThings message encoding and decoding
import time
try:
import crypto # python 2
except ImportError:
from . import crypto # python 3
class OpenThingsException(Exception):
def __init__(self, value):
self.value = value
def __str__(self):
return repr(self.value)
# report has bit 7 clear
# command has bit 7 set
PARAM_ALARM = 0x21
PARAM_DEBUG_OUTPUT = 0x2D
PARAM_IDENTIFY = 0x3F
PARAM_SOURCE_SELECTOR = 0x40 # command only
PARAM_WATER_DETECTOR = 0x41
PARAM_GLASS_BREAKAGE = 0x42
PARAM_CLOSURES = 0x43
PARAM_DOOR_BELL = 0x44
PARAM_ENERGY = 0x45
PARAM_FALL_SENSOR = 0x46
PARAM_GAS_VOLUME = 0x47
PARAM_AIR_PRESSURE = 0x48
PARAM_ILLUMINANCE = 0x49
PARAM_LEVEL = 0x4C
PARAM_RAINFALL = 0x4D
PARAM_APPARENT_POWER = 0x50
PARAM_POWER_FACTOR = 0x51
PARAM_REPORT_PERIOD = 0x52
PARAM_SMOKE_DETECTOR = 0x53
PARAM_TIME_AND_DATE = 0x54
PARAM_VIBRATION = 0x56
PARAM_WATER_VOLUME = 0x57
PARAM_WIND_SPEED = 0x58
PARAM_GAS_PRESSURE = 0x61
PARAM_BATTERY_LEVEL = 0x62
PARAM_CO_DETECTOR = 0x63
PARAM_DOOR_SENSOR = 0x64
PARAM_EMERGENCY = 0x65
PARAM_FREQUENCY = 0x66
PARAM_GAS_FLOW_RATE = 0x67
PARAM_RELATIVE_HUMIDITY=0x68
PARAM_CURRENT = 0x69
PARAM_JOIN = 0x6A
PARAM_LIGHT_LEVEL = 0x6C
PARAM_MOTION_DETECTOR = 0x6D
PARAM_OCCUPANCY = 0x6F
PARAM_REAL_POWER = 0x70
PARAM_REACTIVE_POWER = 0x71
PARAM_ROTATION_SPEED = 0x72
PARAM_SWITCH_STATE = 0x73
PARAM_TEMPERATURE = 0x74
PARAM_VOLTAGE = 0x76
PARAM_WATER_FLOW_RATE = 0x77
PARAM_WATER_PRESSURE = 0x78
PARAM_TEST = 0xAA
param_info = {
PARAM_ALARM : {"n":"ALARM", "u":""},
PARAM_DEBUG_OUTPUT : {"n":"DEBUG_OUTPUT", "u":""},
PARAM_IDENTIFY : {"n":"IDENTIFY", "u":""},
PARAM_SOURCE_SELECTOR : {"n":"SOURCE_SELECTOR", "u":""},
PARAM_WATER_DETECTOR : {"n":"WATER_DETECTOR", "u":""},
PARAM_GLASS_BREAKAGE : {"n":"GLASS_BREAKAGE", "u":""},
PARAM_CLOSURES : {"n":"CLOSURES", "u":""},
PARAM_DOOR_BELL : {"n":"DOOR_BELL", "u":""},
PARAM_ENERGY : {"n":"ENERGY", "u":"kWh"},
PARAM_FALL_SENSOR : {"n":"FALL_SENSOR", "u":""},
PARAM_GAS_VOLUME : {"n":"GAS_VOLUME", "u":"m3"},
PARAM_AIR_PRESSURE : {"n":"AIR_PRESSURE", "u":"mbar"},
PARAM_ILLUMINANCE : {"n":"ILLUMINANCE", "u":"Lux"},
PARAM_LEVEL : {"n":"LEVEL", "u":""},
PARAM_RAINFALL : {"n":"RAINFALL", "u":"mm"},
PARAM_APPARENT_POWER : {"n":"APPARENT_POWER", "u":"VA"},
PARAM_POWER_FACTOR : {"n":"POWER_FACTOR", "u":""},
PARAM_REPORT_PERIOD : {"n":"REPORT_PERIOD", "u":"s"},
PARAM_SMOKE_DETECTOR : {"n":"SMOKE_DETECTOR", "u":""},
PARAM_TIME_AND_DATE : {"n":"TIME_AND_DATE", "u":"s"},
PARAM_VIBRATION : {"n":"VIBRATION", "u":""},
PARAM_WATER_VOLUME : {"n":"WATER_VOLUME", "u":"l"},
PARAM_WIND_SPEED : {"n":"WIND_SPEED", "u":"m/s"},
PARAM_GAS_PRESSURE : {"n":"GAS_PRESSURE", "u":"Pa"},
PARAM_BATTERY_LEVEL : {"n":"BATTERY_LEVEL", "u":"V"},
PARAM_CO_DETECTOR : {"n":"CO_DETECTOR", "u":""},
PARAM_DOOR_SENSOR : {"n":"DOOR_SENSOR", "u":""},
PARAM_EMERGENCY : {"n":"EMERGENCY", "u":""},
PARAM_FREQUENCY : {"n":"FREQUENCY", "u":"Hz"},
PARAM_GAS_FLOW_RATE : {"n":"GAS_FLOW_RATE", "u":"m3/hr"},
PARAM_RELATIVE_HUMIDITY:{"n":"RELATIVE_HUMIDITY", "u":"%"},
PARAM_CURRENT : {"n":"CURRENT", "u":"A"},
PARAM_JOIN : {"n":"JOIN", "u":""},
PARAM_LIGHT_LEVEL : {"n":"LIGHT_LEVEL", "u":""},
PARAM_MOTION_DETECTOR : {"n":"MOTION_DETECTOR", "u":""},
PARAM_OCCUPANCY : {"n":"OCCUPANCY", "u":""},
PARAM_REAL_POWER : {"n":"REAL_POWER", "u":"W"},
PARAM_REACTIVE_POWER : {"n":"REACTIVE_POWER", "u":"VAR"},
PARAM_ROTATION_SPEED : {"n":"ROTATION_SPEED", "u":"RPM"},
PARAM_SWITCH_STATE : {"n":"SWITCH_STATE", "u":""},
PARAM_TEMPERATURE : {"n":"TEMPERATURE", "u":"C"},
PARAM_VOLTAGE : {"n":"VOLTAGE", "u":"V"},
PARAM_WATER_FLOW_RATE : {"n":"WATER_FLOW_RATE", "u":"l/hr"},
PARAM_WATER_PRESSURE : {"n":"WATER_PRESSURE", "u":"Pa"},
}
crypt_pid = None
def init(pid):
global crypt_pid
crypt_pid = pid
def warning(msg):
print("warning:" + str(msg))
def trace(msg):
print("OpenThings:%s" % str(msg))
#----- MESSAGE DECODER --------------------------------------------------------
#TODO if silly lengths or silly types seen in decode, this might imply
#we're trying to process an encrypted packet without decrypting it.
#the code should be more robust to this (by checking the CRC)
def decode(payload, decrypt=True):
"""Decode a raw buffer into an OpenThings pydict"""
#Note, decrypt must already have run on this for it to work
length = payload[0]
# CHECK LENGTH
if length+1 != len(payload) or length < 10:
raise OpenThingsException("bad payload length")
#return {
# "type": "BADLEN",
# "len_actual": len(payload),
# "len_expected": length,
# "payload": payload[1:]
#}
# DECODE HEADER
mfrId = payload[1]
productId = payload[2]
encryptPIP = (payload[3]<<8) + payload[4]
header = {
"mfrid" : mfrId,
"productid" : productId,
"encryptPIP": encryptPIP
}
if decrypt:
# DECRYPT PAYLOAD
# [0]len,mfrid,productid,pipH,pipL,[5]
crypto.init(crypt_pid, encryptPIP)
crypto.cryptPayload(payload, 5, len(payload)-5) # including CRC
#printhex(payload)
# sensorId is in encrypted region
sensorId = (payload[5]<<16) + (payload[6]<<8) + payload[7]
header["sensorid"] = sensorId
# CHECK CRC
crc_actual = (payload[-2]<<8) + payload[-1]
crc_expected = calcCRC(payload, 5, len(payload)-(5+2))
#trace("crc actual:%s, expected:%s" %(hex(crc_actual), hex(crc_expected)))
if crc_actual != crc_expected:
raise OpenThingsException("bad CRC")
#return {
# "type": "BADCRC",
# "crc_actual": crc_actual,
# "crc_expected": crc_expected,
# "payload": payload[1:],
#}
# DECODE RECORDS
i = 8
recs = []
while i < length and payload[i] != 0:
# PARAM
param = payload[i]
wr = ((param & 0x80) == 0x80)
paramid = param & 0x7F
if paramid in param_info:
paramname = (param_info[paramid])["n"] # name
paramunit = (param_info[paramid])["u"] # unit
else:
paramname = "UNKNOWN_" + hex(paramid)
paramunit = "UNKNOWN_UNIT"
i += 1
# TYPE/LEN
typeid = payload[i] & 0xF0
plen = payload[i] & 0x0F
i += 1
rec = {
"wr": wr,
"paramid": paramid,
"paramname": paramname,
"paramunit": paramunit,
"typeid": typeid,
"length": plen
}
if plen != 0:
# VALUE
valuebytes = []
for x in range(plen):
valuebytes.append(payload[i])
i += 1
value = Value.decode(valuebytes, typeid, plen)
rec["valuebytes"] = valuebytes
rec["value"] = value
# store rec
recs.append(rec)
return {
"type": "OK",
"header": header,
"recs": recs
}
#----- MESSAGE ENCODER --------------------------------------------------------
#
# Encodes a message using the OpenThings message payload structure
# R1 message product id 0x02 monitor and control (in switching program?)
# C1 message product id 0x01 monitor only (in listening program)
def encode(spec, encrypt=True):
"""Encode a pydict specification into a OpenThings binary payload"""
# The message is not encrypted, but the CRC is generated here.
payload = []
# HEADER
payload.append(0) # length, fixup later when known
header = spec["header"]
payload.append(header["mfrid"])
payload.append(header["productid"])
if not ("encryptPIP" in header):
if encrypt:
warning("no encryptPIP in header, assuming 0x0100")
encryptPIP = 0x0100
else:
encryptPIP = header["encryptPIP"]
payload.append((encryptPIP&0xFF00)>>8) # MSB
payload.append((encryptPIP&0xFF)) # LSB
sensorId = header["sensorid"]
payload.append((sensorId>>16) & 0xFF) # HIGH
payload.append((sensorId>>8) & 0xFF) # MID
payload.append((sensorId) & 0XFF) # LOW
# RECORDS
for rec in spec["recs"]:
wr = rec["wr"]
paramid = rec["paramid"]
typeid = rec["typeid"]
if "length" in rec:
length = rec["length"]
else:
length = None # auto detect
# PARAMID
if wr:
payload.append(0x80 + paramid) # WRITE
else:
payload.append(paramid) # READ
# TYPE/LENGTH
payload.append((typeid)) # need to back patch length for auto detect
lenpos = len(payload)-1 # for backpatch
# VALUE
valueenc = [] # in case of no value
if "value" in rec:
value = rec["value"]
valueenc = Value.encode(value, typeid, length)
if len(valueenc) > 15:
raise ValueError("value longer than 15 bytes")
for b in valueenc:
payload.append(b)
payload[lenpos] = (typeid) | len(valueenc)
# FOOTER
payload.append(0) # NUL
crc = calcCRC(payload, 5, len(payload)-5)
payload.append((crc>>8) & 0xFF) # MSB
payload.append(crc&0xFF) # LSB
# back-patch the length byte so it is correct
payload[0] = len(payload)-1
if encrypt:
# ENCRYPT
# [0]len,mfrid,productid,pipH,pipL,[5]
crypto.init(crypt_pid, encryptPIP)
crypto.cryptPayload(payload, 5, len(payload)-5) # including CRC
return payload
#---- VALUE CODEC -------------------------------------------------------------
class Value():
UINT = 0x00
UINT_BP4 = 0x10
UINT_BP8 = 0x20
UINT_BP12 = 0x30
UINT_BP16 = 0x40
UINT_BP20 = 0x50
UINT_BP24 = 0x60
CHAR = 0x70
SINT = 0x80
SINT_BP8 = 0x90
SINT_BP16 = 0xA0
SINT_BP24 = 0xB0
# C0,D0,E0 RESERVED
FLOAT = 0xF0
@staticmethod
def typebits(typeid):
"""work out number of bits to represent this type"""
if typeid == Value.UINT_BP4: return 4
if typeid == Value.UINT_BP8: return 8
if typeid == Value.UINT_BP12: return 12
if typeid == Value.UINT_BP16: return 16
if typeid == Value.UINT_BP20: return 20
if typeid == Value.UINT_BP24: return 24
if typeid == Value.SINT_BP8: return 8
if typeid == Value.SINT_BP16: return 16
if typeid == Value.SINT_BP24: return 24
raise ValueError("Can't calculate number of bits for type:" + str(typeid))
@staticmethod
def highestClearBit(value, maxbits=15*8):
"""Find the highest clear bit scanning MSB to LSB"""
mask = 1<<(maxbits-1)
bitno = maxbits-1
while mask != 0:
#trace("compare %s with %s" %(hex(value), hex(mask)))
if (value & mask) == 0:
#trace("zero at bit %d" % bitno)
return bitno
mask >>= 1
bitno-=1
#trace("not found")
return None # NOT FOUND
@staticmethod
def valuebits(value):
"""Work out number of bits required to represent this value"""
if value >= 0 or type(value) != int:
raise RuntimeError("valuebits only on -ve int at moment")
if value == -1: # always 0xFF, so always needs exactly 2 bits to represent (sign and value)
return 2 # bits required
#trace("valuebits of:%d" % value)
# Turn into a 2's complement representation
MAXBYTES=15
MAXBITS = 1<<(MAXBYTES*8)
#TODO check for truncation?
value = value & MAXBITS-1
#trace("hex:%s" % hex(value))
highz = Value.highestClearBit(value, MAXBYTES*8)
#trace("highz at bit:%d" % highz)
# allow for a sign bit, and bit numbering from zero
neededbits = highz+2
#trace("needed bits:%d" % neededbits)
return neededbits
@staticmethod
def encode(value, typeid, length=None):
#trace("encoding:" + str(value))
if typeid == Value.CHAR:
if type(value) != str:
value = str(value)
if length != None and len(str) > length:
raise ValueError("String too long")
result = []
for ch in value:
result.append(ord(ch))
if len != None and len(result) < length:
for a in range(length-len(result)):
result.append(0) # zero pad
return result
if typeid == Value.FLOAT:
raise ValueError("IEEE-FLOAT not yet supported")
if typeid <= Value.UINT_BP24:
# unsigned integer
if value < 0:
raise ValueError("Cannot encode negative number as an unsigned int")
if typeid != Value.UINT:
# pre-adjust for BP
if type(value) == float:
value *= (2**Value.typebits(typeid)) # shifts float into int range using BP
value = round(value, 0) # take off any unstorable bits
value = int(value) # It must be an integer for the next part of encoding
# code it in the minimum length bytes required
# Note that this codes zero in 0 bytes (might not be correct?)
v = value
result = []
while v != 0:
result.insert(0, v&0xFF) # MSB first, so reverse bytes as inserting
v >>= 8
# check length mismatch and zero left pad if required
if length != None:
if len(result) < length:
result = [0 for x in range(length-len(result))] + result
elif len(result) > length:
raise ValueError("Field width overflow, not enough bits")
return result
if typeid >= Value.SINT and typeid <= Value.SINT_BP24:
# signed int
if typeid != Value.SINT:
# pre-adjust for BP
if type(value) == float:
value *= (2**Value.typebits(typeid)) # shifts float into int range using BP
value = round(value, 0) # take off any unstorable bits
value = int(value) # It must be an integer for the next part of encoding
#If negative, take complement by masking with the length mask
# This turns -1 (8bit) into 0xFF, which is correct
# -1 (16bit) into 0xFFFF, which is correct
# -128(8bit) into 0x80, which is correct
#i.e. top bit will always be set as will all following bits up to number
if value < 0: # -ve
if typeid == Value.SINT:
bits = Value.valuebits(value)
else:
bits = Value.typebits(typeid)
#trace("need bits:" + str(bits))
# NORMALISE BITS TO BYTES
####HERE#### round up to nearest number of 8 bits
# if already 8, leave 1,2,3,4,5,6,7,8 = 8 0,1,2,3,4,5,6,7 (((b-1)/8)+1)*8
# 9,10,11,12,13,14,15,16=16
bits = (((bits-1)/8)+1)*8 # snap to nearest byte boundary
#trace("snap bits to 8:" + str(bits))
value &= ((2**bits)-1)
neg = True
else:
neg = False
#encode in minimum bytes possible
v = value
result = []
while v != 0:
result.insert(0, v&0xFF) # MSB first, so reverse when inserting
v >>= 8
# if desired length mismatch, zero pad or sign extend to fit
if length != None: # fixed size
if len(result) < length: # pad
if not neg:
result = [0 for x in range(length-len(result))] + result
else: # negative
result = [0xFF for x in range(length-len(result))] + result
elif len(result) >length: # overflow
raise ValueError("Field width overflow, not enough bits")
return result
raise ValueError("Unknown typeid:%d" % typeid)
@staticmethod
def decode(valuebytes, typeid, length):
if typeid <= Value.UINT_BP24:
result = 0
# decode unsigned integer first
for i in range(length):
result <<= 8
result += valuebytes[i]
# process any fixed binary points
if typeid == Value.UINT:
return result # no BP adjustment
return (float(result)) / (2**Value.typebits(typeid))
elif typeid == Value.CHAR:
result = ""
for b in range(length):
result += chr(b)
return result
elif typeid >= Value.SINT and typeid <= Value.SINT_BP24:
# decode unsigned int first
result = 0
for i in range(length):
result <<= 8
result += valuebytes[i]
# turn to signed int based on high bit of MSB
# 2's comp is 1's comp plus 1
neg = ((valuebytes[0] & 0x80) == 0x80)
if neg:
onescomp = (~result) & ((2**(length*8))-1)
result = -(onescomp + 1)
# adjust for binary point
if typeid == Value.SINT:
return result # no BP, return as int
else:
# There is a BP, return as float
return (float(result))/(2**Value.typebits(typeid))
elif typeid == Value.FLOAT:
return "TODO_FLOAT_IEEE_754-2008" #TODO: IEEE 754-2008
raise ValueError("Unsupported typeid:%" + hex(typeid))
#----- CRC CALCULATION --------------------------------------------------------
#int16_t crc(uint8_t const mes[], unsigned char siz)
#{
# uint16_t rem = 0;
# unsigned char byte, bit;
#
# for (byte = 0; byte < siz; ++byte)
# {
# rem ^= (mes[byte] << 8);
# for (bit = 8; bit > 0; --bit)
# {
# rem = ((rem & (1 << 15)) ? ((rem << 1) ^ 0x1021) : (rem << 1));
# }
# }
# return rem;
#}
def calcCRC(payload, start, length):
rem = 0
for b in payload[start:start+length]:
rem ^= (b<<8)
for bit in range(8):
if rem & (1<<15) != 0:
# bit is set
rem = ((rem<<1) ^ 0x1021) & 0xFFFF # always maintain U16
else:
# bit is clear
rem = (rem<<1) & 0xFFFF # always maintain U16
return rem
def showMessage(msg, timestamp=None):
"""Show the message in a friendly format"""
# HEADER
header = msg["header"]
mfrid = header["mfrid"]
productid = header["productid"]
sensorid = header["sensorid"]
if timestamp != None:
print("receive-time:%s" % time.strftime('%Y-%m-%d %H:%M:%S', time.localtime(timestamp)))
print("mfrid:%s prodid:%s sensorid:%s" % (hex(mfrid), hex(productid), hex(sensorid)))
# RECORDS
for rec in msg["recs"]:
wr = rec["wr"]
if wr == True:
write = "write"
else:
write = "read "
paramid = rec["paramid"]
paramname = rec["paramname"]
paramunit = rec["paramunit"]
if "value" in rec:
value = rec["value"]
else:
value = None
print("%s %s %s = %s" % (write, paramname, paramunit, str(value)))
def alterMessage(message, **kwargs):
"""Change parameters in-place in a message template"""
# e.g. header_sensorid=1234, recs_0_value=1
for arg in kwargs:
path = arg.split("_")
value = kwargs[arg]
m = message
for p in path[:-1]:
try:
p = int(p)
except:
pass
m = m[p]
#trace("old value:%s" % m[path[-1]])
m[path[-1]] = value
#trace("modified:" + str(message))
return message
def getFromMessage(message, keypath):
"""Get a field from a message, given an underscored keypath to the item"""
path = keypath.split("_")
for p in path[:-1]:
try:
p = int(p)
except:
pass
message = message[p]
return message[path[-1]]
# END
David Whale