pyenergenie

A python interface to the Energenie line of products

This is the beginnings of an open source library to access the Energine range of power control and monitoring products from within Python.

The Energenie product line uses the HopeRF radio transciever, and the OpenHEMS protocol from Sentec. Energenie have built a RaspberryPi add-on board that interfaces to the HopeRF RFM69, and allows both control and monitoring of their products from a Raspberry Pi.

There are some existing Python libraries for some Energenie products, but they do not support the full radio interface and full product range.

Energenie also have a modified set of C test code based on the HopeRF test harness, but this does not support all products, all variants of Raspberry Pi hardware, or all versions of the Raspbian OS.

This project aims to develop an open source Python module, providing access to many or all of the features of the OpenHEMS, HopeRF and Energenie product line.

Purpose

This is an early release, and is the beginnings of this work. It is not representative of the final API, but it is a starting point for me to start experimenting with ideas and testing out reliability, with a view to using these products to integrate into an Internet of Things solution provided by Iotic-Labs Ltd.

With it, you can receive monitor payloads from an Energenie MiHome Adaptor Plus, directly within Python programs. This type of plug can be used for energy monitoring and also for relay control of the socket.

I've tried to make this a 'zero install' and 'zero configuration' experience. In theory (at least) you should be able to download the zip or git-clone, plug in your Energenie radio, plug in your MiHome Adapter Plus, and run the code to see data coming back.

Getting Going

1. Plug in your ENER314-RT-VER01 board from energine onto the 26 pin connector of your Raspberry Pi. At the moment I have only tested this with a Raspberry Pi B, although there is no reason why it should not work with any of the models currently available on the market. The underlying GPIO and SPI has been tested in other projects on a Pi2 for example.

2. Use the Download As Zip link to the right, and unzip the files onto your Raspberry Pi.

3. unzip the software

unzip pyenergenie-master.zip
cd pyenergenie-master
cd src

1. run the monitor test program

sudo python monitor.py

After a few seconds, you should see some packet dumps appearing on the screen. These packets are then decoded and displayed in a dictionary format, and for certain messages, also in a more friendly format.

If it crashes, it sometimes leaves the radio in an indeterminite state, remove and replace the radio board and it should reset it (but see notes below about this).

Plans

1. Add RESET support - the radio sometimes gets into an unknown and unrecoverable state and I have to remove the board to reset the radio. There might be a RESET line or a RESET command that can be sent at startup to solve this.

2. Construct commands for switch-on and switch-off, and test sending these to a specific sensorid.

3. Push a fair amount of the radio interface and some of OpenHEMS back down into a C library that implements the same interface as what we have at this point in the Python. Write a ctypes wrapper around this, so that the identical Python internal API is presented. The idea being that the first pass of Python coding defines the API we want to use, and the second pass turns this into a single library that does everything, exposed to Python via ctypes, but linkable to other applications and languages too.

David Whale

@whaleygeek

September 2015